Breeching Inlet
Features
- Compact design with excellent flow characteristics
- High quality casting fiishes
- Adjustable Relief Valve
- 25 mm drain valve with blanking cap and chain
- Maintenance free
- Vertical or horizontal mounting
- The breeching inlets are manufactured to comply with BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non-return valves
Description
Breeching Inlets are installed outside the building or any easily accessible area in the building for fiefihting purposes by fie brigade personnel to access the inlet. Breeching Inlets are fited with inlet connection at fie brigade access level and outlet connection at specifid points. It is normally dry but capable of being charged with water by pumping from fie service appliances.
Specification
- Model:
- conductor:
- insulation thickness:
- Min insulation thickness:
- inner wire:
- wire numbers:
- drain:
- wrapping:
- jacket:
- OD:
- Jacket thickness:
- Min jacket thickness:
- Rated temperature:
- Voltage resistance:
- Voltage resistance:
- Application:
- UL FPLR 2× 1.5MM²
- 1.5mm² solid bare copper
- 0.45 mm
- 0.38 mm
- brown,blue(flame retardant PVC)
- 2 core
- 0.8mm tinned copper
- Al-foil
- red (flame retardant PVC)
- 6.0± 0.3 mm
- 0.74 mm
- 0.65 mm
- 105o
- AC: 2500V/2S, no breakdown
- VW-1
- fire alarm systems
- UL FPLR 2× 2.5MM²
- 2.5mm² solid bare copper
- 0.53 mm
- 0.46 mm
- brown,blue(flame retardant PVC)
- 2 core
- 0.8mm tinned copper
- Al-foil
- red(flame retardant PVC)
- 7.1± 0.3mm
- 0.74mm
- 0.65mm
- 105
- AC： 2500V/2S： no breakdown
- VW-1
- fire alarm systems
Application
Breeching Inlets are suitable for installation on dry risers outside the building or any easily accessible area in the building and are intended to be used by the fie brigade personnel to provide them readily available means of water in considerable quantities to prevent the spread of fie.
Ordering Information
Specify
1.Model number, Material
2.Type & Pressure
3.Inlet Oulet Connection
4.Optional item
5.Approval Requirement
1.Model number, Material
2.Type & Pressure
3.Inlet Oulet Connection
4.Optional item
5.Approval Requirement
